School Bus Pre‑Trip Inspection Practice Test

These questions are part of the practice quiz. Start practicing

• During a check of the defroster fans, what should you verify about their functionality?
• What do you verify concerning the bus’s operational gauges before driving?
• What should you ensure about the bus’s emergency exits?
• What should be the condition of the School Bus sign?
• What is one of the primary purposes of conducting a pre-trip inspection?
• How should the bus's doors be inspected?
• Which condition must be met for all windows and seals on a school bus?
• What action should be taken regarding roof hatches during inspection?
• What is one critical component of the emergency equipment on a school bus?
• What is the condition required for reflectors on a school bus?
• What indicates the condition of brake linings or disc pads?
• What condition must a spare tire meet during a pre-trip inspection?
• In addition to checking the seats, what must also be verified for passenger safety?
• Which of the following is NOT a requirement for the student mirror during a pre-trip inspection?
• What should be assessed about the bus’s lights and signals during the inspection?
• What is the required condition for reflectors during inspection?
• What should you inspect regarding the bus’s exhaust system?
• Which condition is unacceptable for the water pump during a pre-trip inspection?
• What is the condition expected for spring bushings during inspection?
• What should the school bus sign be like?
• During inspection, what should be checked on the brake drums or rotors?
• What should be checked regarding the bus’s wipers during a pre-trip inspection?
• What is the normal operating range for the oil pressure gauge?
• What is a crucial safety feature for school buses related to emergency exits?
• What should you be looking for in the temperature gauge during the inspection?
• What should be the state of u-bolts for the bus to pass inspection?
• What is the sequence of actions for the air brake test?
• What must be verified about the fuel door of the bus?
• During a pre-trip inspection, what should be observed regarding the bus's lights?
• Which regulation mandates bus drivers to perform pre-trip inspections?
• What feature should operate correctly in a pre-trip inspection related to the windshield?
• What does the pre-trip inspection require for the air dryer?
• What lights should you check on the passenger and driver side during a pre-trip inspection?
• What is a requirement for airbags on a bus?
• Why is it important to check the windshield during the inspection?
• What is the condition requirement for the stair light?
• What should the condition of the inside of the windshield be during a pre-trip inspection?
• What must be visible for the driver to check that lights are functioning properly?
• What needs to be checked regarding the stop sign and cross arm on the bus?
• Functionally, why must the bus's headlights be clean?
• Which issue might be indicated if the bus is leaning?
• What are you checking for with the voltmeter?
• What should the condition of clearance lights be during the inspection?
• What is the correct pressure for properly inflated tires on a school bus?
• During inspection, which of the following best describes the proper coolant level?
• What condition must the brake hose meet?
• What should be observed concerning the lights on the bus?
• What should you demonstrate when checking the heaters in the bus?
• What is a key aspect to check regarding the inspection stickers?
• What must be true about the front passenger side tire's suspension during inspection?
• What should be observed for the tires during a pre-trip inspection?
• What is the importance of ensuring the driveshaft is secure?
• What condition must the outside mirrors (crossover, convex, and flat) meet during inspection?
• In what area of the bus should the step well be inspected?
• How should emergency exits be maintained?
• What color should the clearance lights on the bus be?
• What must be true about the emergency door of a school bus?
• How must the windshield wiper blades be maintained to ensure proper function?
• What is the proper lighting condition when you turn on the headlights during the inspection?
• What condition must the differential or pumpkin meet during inspection?
• During a pre-trip inspection, what is true about cross members?
• What should be checked about the bus's shocks?
• Why do you check the stop arm during inspection?
• The condition of which component is critical in ensuring proper braking function?
• What should you check regarding the power steering gearbox during inspection?
• During a pre-trip inspection, what indicates an issue with the oil pressure gauge?
• What should you examine in the engine compartment during the inspection?
• What is one key aspect of inspecting hoses and wires in a bus?
• What is a clear indication that the alternator belt requires attention during the inspection?
• What should be the condition of clearance lights during a pre-trip inspection?
• What condition must reverse lights fulfill?
• What should you look for regarding the wheelchair lift equipment?
• How should the clearance lights at the rear of the bus appear?
• What should happen when you start the bus regarding the ABS indicator on the dashboard?
• What is required for both valve stems and caps?
• What indicates a loose rim during inspection?
• What should be checked under the bus regarding the drive shaft?
• What is required for the tail lights and brake lights of a school bus?
• What indicates that the washer fluid system is functional?
• What is the proper color for the school bus lights according to regulations?
• What should be the general condition of the bus side panels during inspection?
• What is a key characteristic of the water pump belt that should be checked?
• What is the purpose of the bus's horn during a pre-trip inspection?
• What is the inspection requirement for the rear tire bud spacer?
• What aspect of the bus battery should be inspected?
• Why is it important to put the bus key in your pocket during the pre-trip check?
• What should be the condition of the bus’s tires during a pre-trip inspection?
• What is the significance of the air intake system?
• Which is a requirement for the strobe light on a school bus?
• What is a requirement for the fuel tank of a school bus?
• What requirement is necessary for all wires and hoses in the bus?
• What should be true about all wires and hoses during a pre-trip inspection?
• What should the condition of the door seal on the emergency door be?
• What condition do spring bushings need to meet during inspection?
• What condition must the hood straps meet?
• What should be checked on the floor of the school bus during an inspection?
• Why is it important to check the bus's tire pressure?
• Which component is necessary for connecting the steering wheel to the steering mechanism?
• What is the first step in checking the bus before a trip?
• What is required for the condition of the school bus sign during an inspection?
• What is an important aspect of inspecting the tires during the pre-trip check?
• How should the power steering fluid level be during inspection?
• Which component is necessary to check to ensure visibility while driving?
• During the inspection of the alternator, which of the following must be true?
• What should be done if the strobe light on the bus is found to be broken?
• Which of the following statements is true about the bus bumper?
• What fluid levels need to be checked during the pre-trip inspection?
• What indicates that a hub seal is functioning properly?
• What is required for the first aid kit to meet pre-trip inspection standards?
• What does a secure shock absorber contribute to in a bus?
• What should be checked regarding the splash guards on a school bus?
• What action must the driver perform while checking the signal lights?
• Which function is the stop sign expected to perform?
• What is a requirement for the function of the voltmeter during pre-trip inspection?
• How can you identify a secure bus stop during the inspection?
• What should a person do before stepping onto the bus?
• During a pre-trip inspection, how should turn signals appear?
• What is an important feature to check on the brake drums or rotors?
• During the inspection of the steering wheel, how much play is acceptable?
• What should be true about the emergency door's latching mechanism during inspection?
• What condition must the turn signals and flashers meet?
• What is the function of the emergency exit alarm?
• What should be verified about the bus's battery terminals during the check?
• Which fluid levels should you inspect during a pre-trip bus inspection?
• Which of the following actions is NOT part of checking the student mirror?
• What condition should the bus bumper be in during a pre-trip inspection?
• What should be checked for signs of damage on the rim of the bus?
• What need does the drag link fulfill in the steering system?
• What must the cross members be like in order to pass inspection?
• What needs to be checked regarding the bus’s seat belts?
• What should you verify about the bus's mirrors?
• Why is adjusting the driver’s seat important before starting the bus?
• What is the purpose of checking the bus lights during pre-trip inspection?
• During what weather conditions should you give special consideration during the inspection?
• What condition should the gear shift be in for a safe start of the bus?
• During the pre-trip inspection, what should be checked regarding the lights?
• Where should the school bus be parked during the pre-trip inspection?
• What is the function of the red flashing lights on a school bus?
• What is an important safety feature to check on the bus?
• What is the condition of the turn signals and four-way flashers required to be?
• How can you determine if the wipers are functioning properly?
• What is one safety feature you must check in the passenger compartment?
• During inspection, the condition of all wires and hoses should be?
• Which condition is essential for the fuel cap?
• What should be checked on the driver side of the bus compared to the other side?
• What is checked about the bus tires during the pre-trip inspection?
• What must be assessed regarding the fuel tank cage?
• What should be ensured regarding the bus's emergency exit windows during a pre-trip inspection?
• What condition should the driveshaft U-joints be in?
• What type of inspection process should be used for lights on the bus?
• Which condition should be met for the air dryer during a pre-trip inspection?
• During a pre-trip inspection, what is required for the bus windows?
• Why is it important to check the mirrors during a pre-trip inspection?
• What should the condition of hoses from the power steering to the gearbox be?
• During inspection, how should the slack adjuster function when the brakes are released?
• During a pre-trip inspection, how should the crossing arm function?
• Which condition indicates that leaf springs are in appropriate condition?
• What should you listen for during the brake test?
• Which condition indicates that lug nuts may not be secure?
• What should be checked regarding the air tanks?
• During the inspection, the brake chamber should be checked for which of the following?
• Which of the following is NOT a requirement for the bus's emergency exits?
• What is necessary for reflective tape on the bus?
• Before starting the bus's engine, what must be verified during the pre-trip inspection?
• Which of the following should be checked on the side of the bus?
• What is an essential requirement of the first aid kit on the school bus?
• What should you confirm about the defroster's functionality?
• What is an important sign of a problem with lug nuts?
• Which of the following is one of the required pieces of emergency equipment on a bus?
• How should you check the body of the bus for security?
• How often is a full pre-trip inspection required for a school bus?
• Which mirrors should be inspected on the bus?
• What is the proper procedure for checking the steering mechanism?
• How should the tailpipe of the bus be positioned?
• What is a requirement for the crossing arm during a pre-trip inspection?
• What does it mean if the brake chamber is leaking during inspection?
• What is a requirement for the bus's headlights during inspection?
• What condition must the reflective triangles meet?
• What should be checked regarding the driver's seat belt?
• What is the correct condition of the frame during a bus pre-trip inspection?
• How is the condition of the bus's safety signage assessed?
• What is the proper color for turn signals and four-way flashers on a school bus?
• What must be true about the steering box during a pre-trip inspection?
• What condition must the joints and sockets of the steering linkage meet during a pre-trip inspection?
• What is a crucial requirement for the bus's emergency triangles?
• What is the acceptable condition of the pitman arm during inspection?
• Which component assists in stopping the bus and must be checked?
• Why is inspecting the fuel system of a school bus crucial?
• What is an important aspect in the maintenance of the bus windshield wipers?
• What confirms that the horn is functioning properly?
• Which light indicators must show for the bus’s safety features to be in working order?
• What is the acceptable air pressure range for the air gauge during the pre-trip inspection?
• What is the first thing you should do when starting a pre-trip inspection?
• What constitutes a successful pre-trip inspection?
• During a pre-trip inspection, what is true regarding leaf springs?
• What is a key indicator that bus mirrors are properly adjusted?
• Which tool is essential for checking tire pressure during a pre-trip inspection?
• Which items should be inspected in the bus's tires?
• What is necessary for the exhaust system during a pre-trip inspection?
• Which of these is NOT a requirement for the bus windows during a pre-trip inspection?
• What is the required condition of the air compressor during inspection?
• What aspect of the bus's floor must be inspected?
• To check the air brake system of the bus, what should be performed?
• What action should be taken if the windshield wipers are not functioning correctly?
• What is an essential feature of the windshield wipers that must be checked?
• What feature of the school bus's suspension system must be inspected?
• Which aspect of the engine is crucial to observe for performance during an inspection?
• Which of the following indicators should illuminate on the dashboard during a pre-trip inspection?
• What is required to be present and functional in case of a fire?
• What is a common requirement for the bus's exterior mirrors?
• What is the acceptable amount of play in the power steering belt during inspection?
• What can be a consequence of neglecting pre-trip inspections?
• Why is it important to check the fuel levels in the bus?
• What must be true about the driver's seat during an inspection?
• What is the condition of the shock absorber during a pre-trip inspection?
• What should be done if a malfunction is found during a pre-trip inspection?
• Why is it important to check the bus’s air pressure before driving?
• What is a requirement for the handrails on the bus?
• What must be verified about the exhaust system aside from its connection?
• What component in the steering linkage is responsible for connecting the steering wheel to the steering mechanism?
• What should you check for on the air compressor belt?
• What should the sidewalls of the tires be checked for?
• What is the expected condition of the torque arm during pre-trip inspection?
• What is one task associated with checking the bus’s tires?
• What is a requirement for reflective tape on a school bus?
• What is a key checking point regarding the bus’s transmission?
• Why is it necessary to check the battery during a pre-trip inspection?
• When inspecting airbags, what must be checked for?
• What additional step should be taken if there's a malfunction found during inspection?
• Reflectors must be of which colors for proper compliance?
• How should a light check be performed on the bus?
• What is required for bus seats to pass inspection?
• What must be ensured about the bus’s fuel tank during inspection?
• Which condition of the bus frame is acceptable?
• What should be inspected regarding the shock absorber to ensure it is functioning correctly?
• During the inspection, what should be inspected at the front of the bus?
• What is the requirement for the license plate on the bus?
• Which of the following describes the entrance way stair tread?
• What condition should the power steering belt be in during inspection?
• What must be engaged for a safe start of the bus?
• What is the first step in the pre-trip inspection of a school bus?
• What is the purpose of the brake system inspection?
• How often should a school bus undergo a pre-trip inspection?
• What should the engine oil level be according to inspection standards?
• What should drivers verify regarding the bus's air brakes?
• What is checked in the exhaust system during the pre-trip inspection?
• Why is it important for splash guards to be secured?
• Which of the following indicates that the windshield is safe for driving?
• Which item is NOT a part of the bus exterior inspection?
• What must be ensured about the oil level in a hub seal?
• What aspect of the horn needs to be checked?
• What should the condition of the mirrors be during inspection?
• Why is checking fluid levels important in a pre-trip inspection?
• What indicates that a fire extinguisher is ready for use?
• Which of the following is NOT a component that should typically be checked during a pre-trip inspection?
• Where should the wheel chocks be placed?
• How should the air gauge perform during the bus pre-trip inspection?
• What is the minimum tread depth required during inspection?
• How do you examine the parking brake during the inspection?
• What is the acceptable condition of the slack adjuster and push rod?
• What condition should spare fuses be in during a pre-trip inspection?